|
Dual Axes Amplifier: PD-2M-BL-40-5 |
|
|
|
|
Page 3 of 3 Specifications | Number of axes | 2
| Power supplies
| 18 - 36 VDC
| Motor type
| DC brushed or brushless servo; each axis can be setup independently | Operating temperature
| 0° - 70° C
| Dimensions
| 100 x 88 x 20 mm
| | Diagnostics | Power On LED
Driver Enabled LED
Driver Fault LED
| Driving method
| PWM, advanced unipolar
| Control structure
| Analog voltage/current amplifier
trapezoidal commutation
| Bandwidth
| n/a | Peak current
| 5A, adjustable
| Continuous current
| 4A, adjustable
| Motor voltage
| 9 - 36 VDC
| Command
| ± 10 V | Gain
| V/s 10 (Vs = power supply) | Protections
| Peak current (selectable 7 or 3.5)
Short (between axis phases only)
High junction temperature
Over & under voltage
| Adjustable parameters
| Motor type (Brush or Brushless)
Peak current protection
Command offset
| Interfaces
| Differential input command
Inhibit & Fault (isolated)
TTL or open collector Hall Effect sensors
Current monitor
±5v, GND
| Connectors
| Phoenix Combicon 5.08 mm
Header for analog and digital I/Os
| Note: Most features are provided independently for each axis.
Please consult servo Halbeck for the implications of using a direct voltage/current amplifier.
|
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
- POSYS® 4000-PIEZO Series
Description: The POSYS® 1800-PIEZO, POSYS® 1900-PIEZO and POSYS® 4000-PIEZO are motion control cards (PC-104, PCI-bus and Standalone) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
Products 
