|
Dual Axes Amplifier: LD-AT-2M |
|
|
|
|
Page 3 of 3 Specifications | Number of axes | 2
| Power supplies
| 5, ±12-15 VDC
| Motor type
| brushed servo
| Operating temperature
| 0° - 70° C
| MTBF
| 1,300,000 hours
| Dimensions
| 100 x 88 x 20 mm
| Diagnostics
| Power On LED
Driver Enabled LED
Driver Fault LED
| Driving method
| Linear
| Contrl structure
| Analog current loop
| Bandwidth
| Typical 3 kHz
| Full scale current
| selectable 0.4, 1.2 or 3 A
| Peak current
| 3 A
| Continuous current
| 2 A
| Motor voltage
| 6 - 15 VDC
| Command
| ± 10 V
| Curent loop gain
| 0.04, 0.12 or 0.3 A/V
| Protections
| Peak current, 116% F.S.
Continuous current, 63% F.S.
High heatsink temperature, typical 80° C
| Adjustable limitations
| Maximum motor DC voltage
| | Adjustable parameters | Full scale current
Offset current
| Interfaces
| Single ended command
Inhibit & Fault (isolated)
Abort (isolated)
Current monitor
Heatsink temperature sense
5, ±12V, GND
| | Connectors | Molex / Phonenix (Combicon) for power and motors
Header for digital and analog I/Os
| Notes: The LD is recommended for motors with terminal resistance of 4 ohm at least.
Contact servo Halbeck for lower resistance applications.
Most features are provided independenly for each axis.
|
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
Description: The POSYS® 1800-PIEZO and POSYS® 1900-PIEZO are motion control cards (PC-104, PCI-bus) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
