|
Sine Wave DC Brushless Amplifier: S16A |
|
|
|
|
Page 3 of 3 Specifications Model
Power Stage Specifications
|
S16A8
| | DC Supply Voltage | 20-80 VDC
| Peak Current (2 sec. maximum)
| ± 16 A (11.3 Arms)
| | Maximum Continuous Current | ± 8 A (5.7 Arms)
| Minimum Load Inductance
| 200 µH
| Switching Frequency
| 33 kHz ±15% | Heatsink (base) Temperature Range
| 0° to + 65° C, disables if > 65° C
| Power Dissipation at Continuous Current
| 32 W
| Over-voltage Shut-down (self-reset)
| 86 V
| | Bandwidth ((load dependent) | 2.5 kHz (typical)
| Mechanical Specifications
| | Power Connector | Screw terminals | Signal Connector
| 15 pin D-Sub
| | Size | 5.09 x 3.06 x 1.52 inches
129.3 x 77.7 x 38.6 mm
| Weight
| 10 oz.
0.28 kg
|
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
- POSYS® 4000-PIEZO Series
Description: The POSYS® 1800-PIEZO, POSYS® 1900-PIEZO and POSYS® 4000-PIEZO are motion control cards (PC-104, PCI-bus and Standalone) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
Products 
