|
BD30A EC Servoverstärker mit PWM-Eingang |
|
|
|
|
Seite 3 von 3 Spezifikationen Model
Power Stage Specifications
| BD30A8
| BD25A20
| DC Supply Voltage
| 20-80 VDC
| 40-190 VDC
| Peak Current (2 sec. Max., internally limited
| ± 30 A
| ± 25 A
| Maximum ContinuousCurrent (internally limited)
| ± 15 A
| ± 12.5 A
| Maximum Load Inductance
| 200 µH
| 250 µH
| | Switching Frequency | 5-20 KHz ±15%
| Heatsink (base) Temperature Range
| 0° to +65°C, disables if > 65°C
| | Power Dissipation at Continuous Current | 60 W
| 125 W
| Over-voltage Shutdown (self-reset)
| 86 V
| 195 V
| | Bandwidth (load dependent) | 2.5 KHz
| Mechanical Specifications
| Power Connector
| Screw terminals
| Signal Connector
| Molex connector
| | Size | 7.35 x 4.40 x 1.00 inches
186.7 x 111.7 x 25.4 mm
| Weight
| 1.5 oz.
0.68 kg
|
|
|
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
Description: The POSYS® 1800-PIEZO and POSYS® 1900-PIEZO are motion control cards (PC-104, PCI-bus) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
weiter …
|
|
|
| |
Produkte 
