|
PWM Input Brushed Servo Amplifiers: 50ADD |
|
|
|
|
Page 3 of 3 Specifications Model
Power Stage Specifications
| 30A8DD
| 25A20DD
| 50A8DD
| 50A20DD
| DC Supply Voltage
| 20-80 VDC
| 40-190 VDC
| 20-80 VDC
| 40-190 VDC
| Peak Current (2 sec. Max., internally limited
| ± 30 A
| ± 25 A
| ± 50 A
| ± 50 A
| Maximum ContinuousCurrent (internally limited)
| ± 15 A
| ± 12.5 A
| ± 25 A
| ± 25 A | Maximum Load Inductance
| 150 µH
| 250 µH
| 150 µH
| 250 µH
| | Switching Frequency | 5-20 KHz ±15%
| Heatsink (base) Temperature Range
| 0° to +65°C, disables if > 65°C
| | Power Dissipation at Continuous Current | 60 W
| 125 W
| 100 W
| 250 W
| Over-voltage Shutdown (self-reset)
| 85 V
| 195 V
| 85 V
| 195 V
| | Bandwidth (load dependent) | 2.5 KHz
| Mechanical Specifications
| Power Connector
| Screw terminals | Signal Connector
| Molex connector | | Size | 7.35 x 4.40 x 1.00 inches
186.7 x 111.7 x 25.4 mm | | Weight | 1.5 lb.
0.68 kg |
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
Description: The POSYS® 1800-PIEZO and POSYS® 1900-PIEZO are motion control cards (PC-104, PCI-bus) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
Products 
