|
Brushless Servo Amplifier: KCB1A |
|
|
|
|
Page 3 of 3 Specifications Model
Power Stage Specifications
| KCB1A2
| | DC Supply Voltage | 21-25 VDC
| Peak Current (2. sec. max., internally limited)
| ± 1 A
| Max. Continuous Current (internally limited)
| ± 1 A
| Minimum Load Inductance
| 100 µH
| Switching Frequency
| 40 kHz ±15% | Heatsink (base) Temeperature Range
| 0° to +75°C | Power Dissipation at Continuous Current
| 1 W
| Bandwidth (load dependent)
| 5 kHz
| Mechanical Specifications
| Motor Power Connector
| 5-pin, 0.05 inch spacing, vertical pin connector
Samtec part number: TMS-105-01-S-S | Signal Connectors
| 12-pin, 0.05 inch spacing, vertical pin connector
Samtec part number: TMS-112-01-S-S
| Size (thickness does not include length of pins)
| 1.5 x 1.25 x 0.35 inches
38.1 x 31.8 x 8.9 mm
| Weight
| 0.3 oz.
8.5 g |
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
Description: The POSYS® 1800-PIEZO and POSYS® 1900-PIEZO are motion control cards (PC-104, PCI-bus) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
Products 
