|
Motor Control IC: MC73110 |
|
|
|
|
Seite 4 von 4 Spezifikationen | Motors supported | 3-phase brushless DC
| Motor output modes
| 3-signal PWM outputs, 6-signal PWM outputs with shoot-through protection
| Control loops
| Current/velocity, velocity integrator, profile generator
| Commutation modes
| 6-step (using Hall sensors)
Sinusoidal (with Hall sensors and quadrature encoder input)
Field oriented control
| Current loop rate
| 20 kHz
| Commutation rate
| 10 kHz
| Velociy loop rate
| 10 kHz | Max. quadrature rate (A, B, Index)
| 10 Mcounts/sec.
| Operating modes
| Standalone: uses serial EEPROM or on-board user configuration storage
Serial port: commands sent by host processor
| Serial communication modes
| Point-to-point asynchronous
Multi-drop asynchronous
| Serial baud rate range
| 1,200 to 416,667
| Profile generator
| Velocity contouring
| Profile parameters
| Velocity (32-bit resolution)
Acceleration (32-bit resolution)
| Current feedback
| Two analog signals (10-bit A/D resolution)
| Velocity feedback
| Analog tachometer signal (10-bit A/D resolution)
| Velocity/torque/voltage command sensor options | Analog signal (10-bit A/D resolution)
Digital SPI datastream (16-bit resolution)
Serial port (live commands from host processor)
| Temperature sensor input
| Using I²C bus
| Serial EEPROM input
| Using I²C bus
| SPI input format
| 16-bit 2s complement encoded word
| Max. SPI input rate
| 10 MHz (1.6 µs per 16-bit transmission)
| PWM output method
| Symmetric 3-phase
| Storage temperature (Ts)
| -65º C to 150º C
| Operating temperature (Ta)
| -40º C to 85º C
| Operating current (Idd)
| 105 mA
| Nominal clock frequency (Fclk)
| 10.0 MHz
| Supply voltage operating range (Vcc)
| 3.0 V to 3.6 V
| Analog inputs
| 0 to 3.3 V
| Dimensions
| 12mm x 12mm |
|
|
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
- POSYS® 4000-PIEZO Series
Description: The POSYS® 1800-PIEZO, POSYS® 1900-PIEZO and POSYS® 4000-PIEZO are motion control cards (PC-104, PCI-bus and Standalone) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
weiter …
|
|
|
| |
Produkte 
