|
4 Axes Motion Control Chip w. Interpolation Functionality: MCX314As/MCX314AL |
|
|
|
|
Page 2 of 3
Features - 4-axes independent position/speed control for stepper/pulse-type servo motor drives
- Max. speed of 4 MHz, pulse output and encoder feedback frequency
- 4 MHz speed available for point to point, linear, and circular moves
- Selectable pulse and direction or up/down outputs for each axis
- 32-bit command and actual position registers
- Programmable S-curve, trapezoidal or contoured profiles
- Linear interpolation of any 2 or 3 axes out of 4
- Circular interpolation of any 2 axes out of 4
- Bit pattern interpolation of any 2 or 3 axes out of 4
- 32-bit compare registers (breakpoints) for each axis
- On the fly control of position and speed
- Dedicated inputs for each axis (limits, In-position from amplifier, amplifier alarm)
- Emergency OFF input for all axes
- Dedicated outputs for each axis (in motion, accelerating, decelerating, compare + and -)
Download (go directly to our Download Center or download here; some downloads require registration and seperate login): Data Sheet | Manual
|
|
Newsflash
|
Motion Control Cards with Special PIEZO (Ceramic) Motor Functions Motion Control Chips with special functions to compensate PIEZO Motor behaviour Products Names: - POSYS® 1800-PIEZO Series
- POSYS® 1900-PIEZO Series
Description: The POSYS® 1800-PIEZO and POSYS® 1900-PIEZO are motion control cards (PC-104, PCI-bus) for servo and stepper motors and provide one to four axes of motion. The functionality of these series has been significantly improved by using a special motion control chip with enhanced PIEZO (Ceramic) control functions. It is now possible to compensate the special behaviour of PIEZO (Ceramic) motors like for example stiction. |
|
Read more...
|
|
|
| |
