Highlights 

The POSYS® 3104 provides support for TTL encoders with index signals and for inverted encoder signals. 8 general purpose and 24 dedicated inputs, and 12 general purpose and 16 multiple purpose outputs for home, limit switches and emergency stop and the high input and output frequency for pulse & direction / up/down counter output and encoder input signals enhance these controllers.

The POSYS® 3104 is a low-cost PC104 motion controller offering a wide range of possibilities. The controller is dedicated to pulse & direction output which allows to control any type of motor provided the driver/amplifier is capable to accept pulse & direction signals. Many amplifiers on the market exist for this purpose (we supply versions from AMC) which can even be configured for either brushed or brushless servo motors.

The usage of one controller type throughout the system, but still keeping it open for various motor types, depending on your customer's demands, enhances this controller to be your first choice. Software written for this controller does not need to be re-written again. Time-to-market design is done once. Equip your machine with steppers or servos or combine them to any configuration you desire.

Due to its possibilities there are practically no limitations to where this controller can be used. Robotics, semi-conductor, medical and harsh industrial environments - where ever you need precise control of your motors the POSYS® 3104 is ready.

By stacking additional boards you can easily add axes for control. The host uses a handle to communicate with each board seperately. Systems with 8, 12 or more axes are easily setup. The system is only limited to the number of available addresses. 

Download (go directly to our Download Center or download here; some downloads require registration and seperate login):

Data Sheet | Manual | Software  

Recommended accessories:

IO3000 interconnect module
Cable800B-1m 50-position cable
Cable10 10-position cable for DIO