Highlights 

Motion profiles include S-curve, trapezoidal (with smoothing factor), velocity contouring, and electronic gearing, linear interpolation for 4 axes. In addition they also support external profile mode which allows the user to download complex motion profiles directly in to the controllers memory reliefing the host from extensive calculation tasks.

With up to 164 commands, depending on model, the POSYS® instruction set offers flexibility and versatility to software application programmers. Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and electronic gearing. The POSYS® 8xx-B accepts input parameters such as position, velocity, and acceleration from the host and generates a corresponding trajectory. The POSYS® 8xx-B accepts input parameters such as position, velocity, and acceleration from the host and generates a corresponding trajectory within 12.5 µs.

Download (go directly to our Download Center or download here; some downloads require registration and seperate login):

Data Sheet | Manual | Software  

Recommended accessories:

All models
IO700/800 interconnect module | Cable800B-1m 50-position cable

POSYS® 82x-B/85x-B
IO50 interconnect module | Cable800B-1m 50-position cable